Skip to content

Revolution: Automated full-functional testing for smart devices

One Revolution station tests display, cameras, audio, sensors, ports, buttons, and connectivity with robotics and machine vision, running the same script on every unit, station, and site.

Revolution
  1. 4 to 5min

    Full functional test

    Display, cameras, audio, sensors, connectivity

  2. < 1min

    Operator touch time per device

  3. 5:1

    Stations per trained operator

  4. 10%+

    Higher fault detection

    Versus manual functional testing

For OEMs running high-volume returns, the functional test decides downstream value. Warranty recovery, resale grading, and engineering feedback all draw on the same data, and manual testing carries its variance into every one of those decisions. Revolution runs the same full test on every device and records each result against its serial number and IMEI.

Doing the same coverage by hand takes four or more separate setups. Inside one Revolution fixture, robotics drive physical inputs, the vision system verifies what is on screen, and an onboard DAQ handles audio. Display testing covers RGB, HSV, MURA, and discoloration; camera testing checks sharpness, blur, and sensor contamination, the failures easiest to miss by eye.

Touch time is under a minute and a full cycle takes four to five. One operator runs up to five stations, turning a five-minute manual process into a continuous flow of completed tests with the data attached, consistent across shifts and sites.

Each run records what was tested, what passed, what failed, and the raw measurements behind every result. Across volume, that data reveals failure patterns, supports predictive fault modeling, and shows which parts, suppliers, and firmware versions correlate with faults. It flows in real time into shop-floor and ERP systems.

Revolution video

How Revolution works

  1. Load

    The device goes into a universal adapter that adjusts to phones, tablets, and hybrid notebooks, with changeover under a minute.

  2. Connect

    The right interface engages automatically, whether micro-USB, USB-C, Lightning, or 3.5mm audio, and the fixture closes.

  3. Test

    A robotic arm presses, taps, and swipes while the vision system checks the display and audio runs through the fixture's speakers and microphones.

  4. Report

    Results go to the site database in real time with serial, IMEI, and configuration, and pass or fail routes the device to its next stage.

Common questions

Which devices can Revolution test?

Smartphones, tablets, and hybrid notebooks. The adapter adjusts to different sizes, the connector system handles micro-USB, USB-C, Lightning, and 3.5mm audio, and scripts are scoped per model, so one platform runs many brands without retooling.

How does it fit into an existing flow?

It replaces four or more separate test setups. It can run standalone or sit between initialization, such as Nest, and grading or repair routing, with data flowing to shop-floor and ERP systems.

How customizable is the test?

Test plans are set per customer and device: what is tested, to what tolerance, and in what order. Our engineers update scripts as new models and failure modes appear, and changes deploy centrally to every station.

What data does Revolution produce?

A full record per device: every step, its result, and the raw measurements, stored locally and exportable to customer systems, audit trails, and analytics.

Does Revolution test cellular and RF?

Not today. It focuses on functional and display testing without RF shielding. For cellular and RF requirements we can set up dedicated RF test environments alongside the line.

Other Tech Solutions

Pegasus

Pegasus: AI-Driven Optical Receiving

Optical receiving that identifies products, reads part numbers, captures condition, and creates an image-verified record for every unit.

Ready to test every device the same way, every time?